The aim of this study is to investigate the suitability of the place of Ankara/ Golbasi andesite quarries as earth science’s point of view and to show the importance of engineering discipline which prevents the loss of money and work power in the quarries. For this reason, Hürmat Creek region is selected as the work place as there are quarries which are opened unexceptional and then abandoned because of unproductiveness in the region. The geological structure and the subsurface images of the discontinuities are investigated and the weathered and fractured zones are determined by using the ground penetrating radar (GPR) and seismic refraction method. It is found that, Hürmat creek is a fault zone. There is 6-7 meter weathered and unconsolidated unit. Under this unit, there are fractured, crushed, weathered and uneconomic andesites. It is observed that a quarry was formed at this most weathered part of the region. At first, it was thought that the quarry was abandoned but it was seen later that it was enlarged. This fact highlights that quarrying facilities at the Golbasi andesites are far away from engineering disciplines which are necessary for both quarry owner’s and country’s economy
Bu çalışmanın amacı, Ankara ili Gölbaşı ilçesindeki andezitlerde açılmış ocak yerlerinin yerbilimleri açısından uygunluğunu araştırmak, mühendislik disiplini içinde çalışmanın taş ocakçılığı için önemini göstererek büyük maliyetleri ve emek kayıplarını engellemektir. Bu sebeple çalışma yeri olarak, çevresinde rastgele açılmış ve verim alınamadığı için terk edilmiş olduğu düşünülen ocaklar bulunan Hürmat Deresi bölgesi seçilmiştir. Bölgedeki jeolojik yapı ve süreksizlikler yer radarı (GPR) ve sismik kırılma yöntemleri ile incelenmiş, bozunmanın yüksek olduğu yerler ve kırıklar belirlenmiştir. Bulgular, Hürmat deresinin bir fay zonu olduğunu, yüzeyde 10 metreyi bulan bozunmuş ve topraklanmış birim altında yaklaşık 10-11m kırıklı, çatlaklı, verimi düşük olan andezit birimi yer aldığını göstermektedir. Belirlenen en bozunmuş andezit alanında ise bir ocak açıldığı gözlemlenmiştir. Çalışmanın başlangıcında bu ocağın terk edildiği düşünülmüş ancak daha sonraki günlerde ocağın büyütüldüğü görülmüştür. Buradan da Gölbaşı andezit ocakları işletiminin tamamen yerbilimlerinden uzak çalışmalar ile yürütüldüğü, ekonomik kaybın önlenebilmesi için işletmelerin mühendislik disiplini ile çalışması gerekliliği tekrar vurgulanmıştır
Andezit, sismik kırılma, süreksizlik, taş ocağı , yer radarı (GPR)
Other ID | JA58BJ33RK |
---|---|
Journal Section | Research Article |
Authors |
|
Publication Date | September 1, 2005 |
Submission Date | September 1, 2005 |
Acceptance Date | |
Published in Issue | Year 2005, Volume 44Issue 3 |
Bibtex | @ { madencilik361243, journal = {Scientific Mining Journal}, issn = {2564-7024}, eissn = {2587-2613}, address = {Selanik Cad. No: 19/4 06650 Kızılay-Çankaya / ANKARA - TURKEY}, publisher = {Chamber of Mining Engineers of Turkey}, year = {2005}, volume = {44}, number = {3}, pages = {25 - 33}, title = {The Importance of Engineering Discipline in The Selection of Proper Place for a Quarry: An Application to Gölbaşı Andesites}, key = {cite}, author = {Kadıoğlu, Selma and Uyar Aldaş, Gülsev and Karpuz, Celal and Başkan Düzgün, Şebnem and Kadıoğlu, Yusuf Kağan} } |
APA | Kadıoğlu, S. , Uyar Aldaş, G. , Karpuz, C. , Başkan Düzgün, Ş. & Kadıoğlu, Y. K. (2005). The Importance of Engineering Discipline in The Selection of Proper Place for a Quarry: An Application to Gölbaşı Andesites . Scientific Mining Journal , 44 (3) , 25-33 . Retrieved from http://www.mining.org.tr/en/pub/issue/32502/361243 |
MLA | Kadıoğlu, S. , Uyar Aldaş, G. , Karpuz, C. , Başkan Düzgün, Ş. , Kadıoğlu, Y. K. "The Importance of Engineering Discipline in The Selection of Proper Place for a Quarry: An Application to Gölbaşı Andesites" . Scientific Mining Journal 44 (2005 ): 25-33 <http://www.mining.org.tr/en/pub/issue/32502/361243> |
Chicago | Kadıoğlu, S. , Uyar Aldaş, G. , Karpuz, C. , Başkan Düzgün, Ş. , Kadıoğlu, Y. K. "The Importance of Engineering Discipline in The Selection of Proper Place for a Quarry: An Application to Gölbaşı Andesites". Scientific Mining Journal 44 (2005 ): 25-33 |
RIS | TY - JOUR T1 - The Importance of Engineering Discipline in The Selection of Proper Place for a Quarry: An Application to Gölbaşı Andesites AU - SelmaKadıoğlu, GülsevUyar Aldaş, CelalKarpuz, ŞebnemBaşkan Düzgün, Yusuf KağanKadıoğlu Y1 - 2005 PY - 2005 N1 - DO - T2 - Scientific Mining Journal JF - Journal JO - JOR SP - 25 EP - 33 VL - 44 IS - 3 SN - 2564-7024-2587-2613 M3 - UR - Y2 - 2023 ER - |
EndNote | %0 Scientific Mining Journal The Importance of Engineering Discipline in The Selection of Proper Place for a Quarry: An Application to Gölbaşı Andesites %A Selma Kadıoğlu , Gülsev Uyar Aldaş , Celal Karpuz , Şebnem Başkan Düzgün , Yusuf Kağan Kadıoğlu %T The Importance of Engineering Discipline in The Selection of Proper Place for a Quarry: An Application to Gölbaşı Andesites %D 2005 %J Scientific Mining Journal %P 2564-7024-2587-2613 %V 44 %N 3 %R %U |
ISNAD | Kadıoğlu, Selma , Uyar Aldaş, Gülsev , Karpuz, Celal , Başkan Düzgün, Şebnem , Kadıoğlu, Yusuf Kağan . "The Importance of Engineering Discipline in The Selection of Proper Place for a Quarry: An Application to Gölbaşı Andesites". Scientific Mining Journal 44 / 3 (September 2005): 25-33 . |
AMA | Kadıoğlu S. , Uyar Aldaş G. , Karpuz C. , Başkan Düzgün Ş. , Kadıoğlu Y. K. The Importance of Engineering Discipline in The Selection of Proper Place for a Quarry: An Application to Gölbaşı Andesites. Mining. 2005; 44(3): 25-33. |
Vancouver | Kadıoğlu S. , Uyar Aldaş G. , Karpuz C. , Başkan Düzgün Ş. , Kadıoğlu Y. K. The Importance of Engineering Discipline in The Selection of Proper Place for a Quarry: An Application to Gölbaşı Andesites. Scientific Mining Journal. 2005; 44(3): 25-33. |
IEEE | S. Kadıoğlu , G. Uyar Aldaş , C. Karpuz , Ş. Başkan Düzgün and Y. K. Kadıoğlu , "The Importance of Engineering Discipline in The Selection of Proper Place for a Quarry: An Application to Gölbaşı Andesites", Scientific Mining Journal, vol. 44, no. 3, pp. 25-33, Sep. 2005 |